Instructions for diesel engine water pump
Generally, diesel engine water pump units are used for pumping water, such as drainage, watering and irrigation. Especially in the rainy season, floods occur frequently, and the proportion of diesel engine water pumps is higher
More, no external power supply is required, and the use is also very simple. If you are worried about inconvenient transportation, you can match small or large wheels to realize fast transportation.
1、 Daily inspection:
1. Check that the exhaust pipe leading to the outdoor shall be tight, and the exhaust port shall face down without spark.
2. Check the battery power of diesel engine water pump, maintain the battery every six months, and supplement electrolyte.
3. The inspection instrument shall be complete, the machine shall be wiped frequently, there shall be no dust, the bolts shall not be loose, and the transmission cover shall be intact.
4. All pipeline joints of diesel engine water pump are firm without leakage.
2、 Start up preparation:
1. Inspection items before starting the diesel engine water pump:
(1) Check whether all parts of the diesel engine are normal, whether all accessories are connected reliably, and eliminate abnormal phenomena.
(2) Check whether the circuit wiring of the electric starting system is normal and whether the battery is fully charged.
(3) Observe that the oil pan is filled with oil to the specified oil level. Observe that the fuel injection pump and governor are filled with oil to the specified oil level.
(4) Fill the diesel engine water pump heat exchanger with clean cooling water.
(5) Press the fuel pump by hand to fill the fuel system with fuel and remove air.
(6) Whether the coolant in the diesel engine water tank is full, whether the oil level of lubricating oil is within the normal range, and whether the diesel oil level in the diesel tank is more than 2 / 3.
2. Preparations before starting the diesel engine water pump:
(1) There should be enough lubricant in the water pump bearing body.
(2) The water outlet pipeline is closed temporarily (the outlet valve shall be opened immediately after successful startup).
In the process of use, there will inevitably be some losses, which will affect the performance of the machinery. Therefore, we need to pay high attention to this and take relevant maintenance measures
In this way, it is not easy to fail and affect the normal progress of the work. Therefore, before use, it is best to understand and understand the instructions. Only in this way can our work be carried out more continuously and normally without too much impact and harm.
More information feel free to contact with us
