Horizontal Split Case Water Pump

Also named as double suction water pump. Since the suction and discharge ports of the Horizontal Split Case Water Pump are below the pump axis line, the impeller is equivalent to two single-suction impellers of the same size combined to work together, and the flow can be achieved with the same size and diameter as the single-stage centrifugal pump impeller. Doubled; this is why it is called a double-suction centrifugal pump. The pump body has two suction chambers. The most special feature is that the water inlet direction of the double-suction impeller is different from that of the single-suction impeller. Flow rate, pump is difficult to appear cavitation phenomenon.

Product Details

double suction water pump (1)

The Advantages of Horizontal Split Case Water Pump

The scope of application is the same as that of the horizontal end suction pump, the flow range is 90~ 3000m3/h, and the head range is 10 -140m. It is characterized by large flow rate and convenient maintenance. In addition, the rotor can be taken out only by opening the pump cover during maintenance without disassembling the motor and connecting pipelines. According to the different installation positions of the shaft, this centrifugal pump can be divided into two structures: a vertical double-suction centrifugal pump and a horizontal double-suction centrifugal pump. The axial force can be automatically balanced without the need to install an axial force balancing device. When overhauling the pump, it is not necessary to dismantle the pipeline connected with the pump body. At the same flow rate, double-suction pumps have better anti-cavitation performance than single-suction pumps.

double suction water pump (3)

Wide Application of The Horizontal Split Case Water Pump

The parts of the pump are pressed by stainless steel plates and welded by laser, and there are many grades of stainless steel available for selection. Therefore, the SLG pump has a wide range of uses. It is mainly suitable for transporting various clean water and light corrosive liquids, and can be used in residential buildings. Water supply and pressurized industrial boiler feed water air conditioning system cycle experience water water treatment and reverse osmosis system food industry, pharmaceutical industry water.

Common faults of Horizontal Split Case Water Pump

1. No water or insufficient water output. (Cause: The pump enters the air, the suction pipe is leaking, the pump speed is low or the steering is wrong.)

Elimination method: continue to water or pump air, press the packing to block the air leakage, increase the speed and change the steering of the driving machine,

2. The pump cannot be started or the starting power is too large (reasons: low voltage, bent pump shaft, and flow rate exceeding the range of use)

Remedy: replace the high-power motor, straighten the pump shaft, and close the water outlet valve.

3. Vibration and noise are strictly exceeding the standard (reason: bearing damage, loose bolts, friction between seal ring and impeller)

Remedy: Replace the pump shaft, tighten the bolts to fill the base, and replace the sealing ring or impeller.

double suction water pump (8)

To know more info about our Horizontal Split Case Water Pump, please feel free to contact with us.

Contact us:

Shirley She

Tel: 0086 312 6795175

Cell: 0086 139 3227 8621 (whatsApp)

Email: admin@deponpump.com

Web: www.deponpump.com

Hot Tags: horizontal split case water pump, made in China, China, manufacturers, factory, quotation, price list

Previous: Double Suction Single Stage Water Pump

Next: Irrigation Double Suction Water Pump

Horizontal Split Case Water Pump

Product Details

Inquiry

You Might Also Like