Points for attention of submersible slurry pump
When the submersible slurry pump is working, the pump needs to be placed on land, the suction pipe in the water, and the pump needs to be started. Due to the limitation of the structure, the motor needs to be placed on the water surface when working, and the pump is put into the water, so it must be fixed, otherwise, the motor will be scrapped when it falls into the water. And because the long shaft length is generally fixed, so the installation and use of the pump is more troublesome, the application of the occasion is a lot of restrictions.
If a backup pump is available, it is best to rotate the two pumps. If the card pump only repair pump, you can add a net in the inlet, do not let too much impurities into the pump, so the probability of the card pump will be much smaller!
Pump to be divided into two aspects of electricity and machine, for the machine, mainly to the previous maintenance records out of the comparison to know. Second is the electrical aspect, to understand the power of each pump motor, to have a certain understanding of his control system. The use of mechanical seal slurry pump, must ensure the shaft seal water supply. It is strictly prohibited to run without water, otherwise the mechanical seal will be burned.
If you are interested, please contact me.
Shirley S.
Phone/WA: +86 13932278621
Email: admin@deponpump.com
Website: www.deponpump.com
